The image on the left shows a deep drilled rivet as well as a solid rivet with a chamfered shank. Designed to fit precisely into counter bored holes and provide a finished appearance on both sides of the cutlery handle. Minimum order quantity is 25,000 pieces of each rivet.
  • Please note: This style of rivet is designed for cutlery assembly as noted. Use of this type of rivet is not recommended for applications other than as described.
  • Please contact our engineering department to discuss your requirements, should they not be listed.
51 - 64 of 64 | Results Per Page | View | Unit of Measure
1 2 3 

Item #

Style

Material

Body Diameter

Head Diameter

N/A Solid N/A 18% Nickel Silver N/A 9/64 Inch N/A 11/32 x 0.050 Inch
N/A Tubular N/A Steel N/A 3/16 Inch N/A 11/32 x 0.050 Inch
N/A Tubular N/A Brass N/A 3/16 Inch N/A 11/32 x 0.050 Inch
N/A Tubular N/A 18% Nickel Silver N/A 3/16 Inch N/A 11/32 x 0.050 Inch
N/A Solid N/A Steel N/A 9/64 Inch N/A 3/8 x 0.050 Inch
N/A Solid N/A Brass N/A 9/64 Inch N/A 3/8 x 0.050 Inch
N/A Solid N/A 18% Nickel Silver N/A 9/64 Inch N/A 3/8 x 0.050 Inch
N/A Tubular N/A Steel N/A 3/16 Inch N/A 3/8 x 0.050 Inch
N/A Tubular N/A Brass N/A 3/16 Inch N/A 3/8 x 0.050 Inch
N/A Tubular N/A 18% Nickel Silver N/A 3/16 Inch N/A 3/8 x 0.050 Inch
N/A Solid N/A Steel N/A 9/64 Inch N/A 7/16 x 0.050 Inch
N/A Solid N/A Brass N/A 9/64 Inch N/A 7/16 x 0.050 Inch
N/A Tubular N/A Steel N/A 3/16 Inch N/A 7/16 x 0.050 Inch
N/A Tubular N/A Brass N/A 3/16 Inch N/A 7/16 x 0.050 Inch
51 - 64 of 64 | Results Per Page | View | Unit of Measure
1 2 3