Tapped Rivets
Standard Rivets and Fasteners
A variation of tubular rivets with a shank drilled and tapped to receive a threaded fastener. Used in materials too thin to accept their own tapping. Chicago Rivet makes tapped rivets with both through holes and blind holes. In addition, we manufacture tapped rivets with weld tip projections that permit the part to be resistance welded to an assembly.
This is a partial listing of our custom part capabilities. Please contact our engineering department to discuss your requirements, should they not be listed.
This is a partial listing of our custom part capabilities. Please contact our engineering department to discuss your requirements, should they not be listed.
1 2
Item # |
Tap |
Material |
A - Body Diameter |
B - Head Diameter |
C - Head Height |
D - Straight Hole Diameter |
---|---|---|---|---|---|---|
R-6004 | Tap N/A #3-48 NC2 | Material N/A Brass | A - Body Diameter N/A .145 to .151 Inch | B - Head Diameter N/A .276 to .286 Inch | C - Head Height N/A .085 to .091 Inch | D - Straight Hole Diameter N/A .099 Inch |
R-6003 | Tap N/A #3-48 NC2 | Material N/A Steel | A - Body Diameter N/A .145 to .151 Inch | B - Head Diameter N/A .276 to .286 Inch | C - Head Height N/A .085 to .091 Inch | D - Straight Hole Diameter N/A .099 Inch |
1 2